Hornby Double Track Level Crossing

Product Code: R636

Production Details:

Double Track Level Crossing. Length: 168mm. Comes with track moulded into the base at intervals to suit standard Hornby twin-track geometry. Supplied with traditional gates as shown here and alternative modern barriers.

Hornby Automatic Level Crossing

Product Code: R8259

Production Details:

Automatic Level Crossing. Railroad Range

Hornby Car Loading Ramp

Product Code: R8260

Production Details:

Railroad Range For use with R6143 Car Transporter. click here

Hornby Car Unloading Terminal

Product Code: R8263

Production Details:

Railroad Range For use with R6423 (wagon not included.)

Hornby Lineside Fencing

Product Code: R537

Production Details:

Length: 305mm each. Six lengths of fencing, supported by clips which engage in standard track side slots.

Hornby Pack of 4 Underlay Sheets

Product Code: R626

Production Details:

Pack of 4 Underlay Sheets. Each sheet: 267mm x 89mm. For cutting and fitting under trackside accessories that have to be raised to the level of the track.

Hornby Roll of Underlay

Product Code: R638

Production Details:

Ideal to fit the width of single track with indentations to fit the sleepers. Strip is flexible to follow any straight or curved track and is easy to cut at junctions where the points and cross-overs may be.

Damps out vibrations, so your trains run more quietly. Length: Approx. 4880mm long.

Gaugemaster - Flexible Grey Ballasted Underlay

Product Code: GM200

Production Details:

5 metre roll of underlay with real granite stone bonded to the foam.

Hornby Electronic Turntable

Product Code: R070

Production Details:

The turntable is designed to operate with the Standard Train Controller R965. Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set). Your speed controller now controls the rotation of the turntable. If you are using an HM2000 or HM4000 controller, then the turntable must be powered from the uncontrolled DC output with an R047 Lever Switch, 'on-off', not from the speed controller output. The set includes eight access track sections and wiring. You can add and subtract access sections to suit your layout, up to a maximum of 14. Diameter: 382mm

Hornby Track Support

Product Code: R909

Production Details:

Maximum height (level to level): 80mm
Four high level piers, plus two sets of seven inclined piers for the approach and exit. These piers clip to the track with a flexing 'clothes peg' action.

Note: The minimum track running length to a height of 80mm with supports at 24 sleeper intervals is approximately 1344mm. However for a more gradual incline with the supports at 30 sleeper intervals the overall running length increases to approximately 1680mm.

Hornby Track Side Wall Set

Product Code: R660

Production Details:

Total length: 1220mm, Set of flexible planking and lattice sidewall sections to fit curved or straight track on piers R658 and R659.

Hornby Incline Piers

Product Code: R658

Production Details:

Maximum height (level to level): 80mm. Set of seven piers in different heights clip to the underside of Hornby track to create a smooth incline, straight or curved. Piers have grooves to accept R660 elevated track sidewalls.

The minimum track running length to a height of 80mm with supports at 24 sleeper intervals is approximately 1344mm. However for a more gradual incline with the supports at 30 sleeper intervals the overall running length increases to approximately 1680mm.

Hornby 3 High Piers

Product Code: R659

Production Details:

Maximum height (level to level): 80mm. Pack of three piers for extended high level track, with grooves to accept R660 elevated track sidewalls.

Lima - Operational Container Crane

Product Code: HL8000

Production Details:

Operational Container Crane. With 2 containers. Scale: 1:87 (HO Gauge). Length: 424mm, Width: 215mm. Distance between each pair of leg: 150mm. Size of the gap between paired legs: 85 - 95mm (top-bottom). The cranes can pick up containers from either side and in between the cranes legs.

The cranes metal grabber will require widening by 1-2mm to take OO gauge containers. The crane does not look out of place on a OO gauge layout

Lima - Operational Container Stacker

Product Code: HL8001

Production Details:

Operational Container Crane Stacker. With 1 container. Scale: 1:87 (HO Gauge). Yellow container fork lift with moving boom arm. Pick up containers using working grab arm, release again using control on top of the grab arm. Does not look out of place on a OO Gauge Layout.