Javis Scenery Maker - Model Rock

Product Code: JSG (Pack of 1) / JSGB (Pack of 4)

Production Details:

Modelling Rock is plaster-impregnated fabric that you can use to form the natural contours on your layout. The fabric is laid wet over a framework (usually fine wire netting) and sets hard when dry. Perfect for building hills.

Scola - Readymix Paint - 600ml Bottles

Product code: E104 - E109

Product Description:

Scola Artmix ready-mixed paint is one of the most widely used painting mediums in primary schools. Part of the Scolaquip Eco range, it uses only natural thickeners and is wheat and gluten-free, so there will be no problems if the paint is accidentally ingested. Scola Artmix is especially formulated to wash off children's skin and most fabrics, making it ideal for young children's painting activities - even the youngest and messiest! Paint should be removed from clothing, etc., while wet if possible and fabrics soaked in cold water. The paint is water-soluble and may be used straight from the bottle, or diluted with water, and dries to a matt finish. Scola Artmix is available in a range of colours, in 600ml, squeezy, re-sealable bottles.

•One of the most widely used paints in primary schools
•Uses only natural thickeners
• Wheat and gluten-free
•Especially formulated to wash off children's skin and fabrics
• Water-soluble - use straight from the bottle or dilute with water
•Dries to a matt finish
•Available in a wide range of colours, in squeezy, re-sealable 600ml bottles

Not suitable for body painting.

DAS - AIR CLAY WHITE 150g

Product code: J150DAS

Product Description:

Air Drying Modelling material which can be used for various types of sculpting and modelling in a white finish. Air drying clay is easy to use, and can be finished with Humbrol paints and varnishes for a superb finish.

DAS - AIR CLAY WHITE 500g

Product code: J500DAS

Product Description:

Air Drying Modelling material which can be used for various types of sculpting and modelling in a white finish. Air drying clay is easy to use, and can be finished with Humbrol paints and varnishes for a superb finish.

DAS - AIR CLAY WHITE 1000g

Product code: J1000DAS

Product Description:

Air Drying Modelling material which can be used for various types of sculpting and modelling in a white finish. Air drying clay is easy to use, and can be finished with Humbrol paints and varnishes for a superb finish.

Washable PVA Adhesive

Product code: E007

Product Description:

Ideal for general classroom use, this red label PVA adhesive is clear drying, and being water soluble, washes out of clothes. 180ml bottle

Deluxe Materials - Scenic Spray (100ml)

Product Code: AD54

Product Description:

Spray glue for the attachment of scenic scatter specially onto trees, baseboards. I recommend this for static grass applications both new and retouching. Dries clear. Gentle spray action. Water clean up. 100ml bottle.

Deluxe Materials - Scenic Scatter Grip (150ml)

Product Code: AD25

Product Description:

Special tacky adhesive for bonding scatter materials to railway and dolls house  scenery . 150ml pack covers 1.5 sqm.

Deluxe Materials - Roket Card Glue (50ml)

Product Code: AD57

Product Description:

For fast assembly of card models. Also bonds Balsa wood, paper card to most plastics. Use sparingly, press parts together. 50ml bottle with tip.

Deluxe Materials - Glue 'n' Glaze (50ml)

Product Code: AD55

Product Description:

For glazing and bonding crystal clear windows and canopies. A liquid plastic film-forming polymer which bonds most plastics and dries to crystal clear film. It is Ideal for miniature windows 00 gauge or up to 6mm across. It will not fog plastics making it ideal for the safe bonding of scale aircraft plastic canopies and glazing dolls houses. Bonds wood, plastic, metal, painted surfaces. Water clean up in use 50ml.

Deluxe Materials - Super Phatic (50ml)

Product Code: AD21

Product Description:

Highly penetrating yellow aliphatic glue with “wicking” action for close fitting pre-assembled joints. Dries fast and bonds wood, foam, plastic. Is waterproof when set and produces tougher joints than cyano. Ideal for:
• Assembly of slot together models
• Repairing splits and cracks in wood or reinforcing suspect joints eg on ARTF ready built model aircraft.
• Indoor lightweights (as loses 50% of weight as it dries.)
• Model rail ballast and card model construction
• Model rocket cardboard tubes.

Deluxe Materials - Roket Rapid (20g)

Product Code: AD44

Product Description:

Medium viscosity, fast setting adhesive; sets 5 to 10 sec. 20g bottle.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Roket Max (20g)

Product Code: AD45

Product Description:

Thick, maximum gap-filling adhesive; sets 10 to 20 sec. 20g bottle

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Roket Odourless (20g)

Product Code: AD46

Product Description:

Crystal clear, low odour grade, non blooming and safe for bonding crystal clear plastics and foam; sets 5 to 10 sec. 20g bottle

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Roket Blaster (50ml)

Product Code: AD17

Product Description:

Spray which permits ROKET cyano to bond difficult surfaces. Pre-condition surfaces, then apply ROKET for instant bond

Deluxe Materials - Glue Buster (25ml)

Product Code: AD48

Product Description:

Debonder and dissolver of super glue. Releases bonded skin. Stays on site for faster debonding action. Contents 25ml.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Syringe Speed Epoxy (28g)

Product Code: AD40

Product Description:

4 minute working time. Sets hard and fast. For setting wood, metal, china, plastics and glass. 4 Min Syringe Speed Epoxy (28g)

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - AeroTech Epoxy (25ml)

Product Code: AD63

Product Description:

Aero T<ch Epoxy, specially designed for bonding composite mouldings. Aero T<ch is non-drip and is used with Aero T>ch Dispenser gun and 8cm mixing nozzle. The syringe dispenses adhesive in equal parts ready for thorough mixing. Aerot<ch fills gaps & forms visible fillets for the highest possible joint strength. Ideal for formers, engine & undercarriage mounts, servo mounts & bulkheads. It gels in 3-4 hours with full cure in 24hrs.
Aero T<ch epoxy Bonds: Epoxy GRP, carbon fibre, aluminum alloy, ply & hardwood etc. . 25ml twin syringe. 50ml twin syringe . Note The 50ml twin syringe is only for use in Aero T<ch dispenser.
Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Speed Bond (112g)

Product Code: AD10

Product Description:

Special modelling PVA that contains no fillers. Superior to many PVA glues. Has unique solvent chemistry for faster drying.

Deluxe Materials - Speed Bond (500g)

Product Code: AD11

Product Description:

Special modelling PVA that contains no fillers. Superior to many PVA glues. Has unique solvent chemistry for faster drying.

Deluxe Materials - Tacky Wax

Product Code: AD29

Product Description:

Wax adhesive for holding miniature ornaments etc in place. Allows repositioning. Approx 28g.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - View Glue

Product Code: AD61

Product Description:

Special adhesive developed for bonding model railway and diorama landscape back scene papers in place. This unique adhesive allows papers to be slithered into position and finely adjusted before drying without creases or wrinkles. Unlike other glues “View Glue” can be used on wood, painted surfaces, plasterboard and even plastic surfaces. 225ml pack will covers 7 sqm

Deluxe Materials - Track Magic

Product Code: AC13

Product Description:

Deluxe Materials Track Magic is a special liquid cleaning fluid for model rail & car metal tracks, electric contacts and wheels. Track Magic works by dissolving, and mobilizing microscopic oily contaminants to leave a clean conducting surface for smooth and steady running.

Track Magic comes with several accessories: a microbrush to clean wheels, power collectors and points, a pad to apply to rail surfaces and a dispensing pipette and beaker. Track magic also works by setting up an invisible protecting film which will resists rust, wear, & corrosion thus minimizing further track maintenance.

In summary it
•Maximizes conductivity & reliability.
•Works in low power/ confined space situations.
•Revives & protects old electric contacts & improves new ones.
•Is safe on plastic, foam, acrylic and enamel paint.
•Is ideal for both digital and analogue control systems

Please note this product can be shipped within the UK Mainland only.

Deluxe Materials - Liquid Gravity

Product Code: BD38

Product Description:

A brand new non-toxic, easy flowing, weighting system for model railway rolling stock, model planes and boats.

Specially designed to pour into small cavities and set in place with adhesive such Roket Card Glue, R/C Modellers Glue, or Speed Epoxy. Use to improve electric conductivity & stability of rolling stock, adjust balance point of model planes and boats submarines. 240g pack

Deluxe Materials - Making Waves (100ml and 250ml)

Product Code: BD39 (100ml) BD40 (250ml)

Product Description:

For creating waves, ripples, waterfalls and moving water effects. Making Waves is a 1- part, clear setting, water based low odour resin that holds its shape , even on vertical surfaces. It can be used to form waves, texture ripples on water surfaces ( e.g. Solid Water ) and even waterfalls.  Colour with water based paints. 100 ml and 250ml packs.

Deluxe Materials - Scenic Water (100ml)

Product Code: BD21

Product Description:

Scenic Water (100ml), Remeltable one part resin. Use to simulate moving water etc.

Image shown - 250ml version

Deluxe Materials - Scenic Water (250ml)

Product Code: BD22

Product Description:

Scenic Water (250ml), Remeltable one part resin. Use to simulate moving water etc.

Deluxe Materials - Scenic Colours

Product Code: BD23

Product Description:

Pack of four dyes (yellow, red, blue and black) in dropper bottles. Ideal for use with Scenic Water. Not Suitable for Solid Water.

Deluxe Materials - Solid water (90ml)

Product Code: BD35

Product Description:

For simulating crystal clear still water. Sets solid stays clear and durable for many years . Low odour. Long shelf life Mix 2;1 resin and hardener. Sets in 24 hours and can be moulded before it sets.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Scenic Rust Kit

Product Code: BD27

Product Description:

For the creation of realistic rust on all types of paintable surfaces wood plastic metal . 3 part system with long shelf life . Coverage approx 0.3 sqm. (17cm by 17cm)

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Scenic Snow Kit

Product Code: BD29

Product Description:

There are many snow systems around in the market. However the difference between a good scene and a dramatic one is the realism that can be created with attention to detail. Scenic Snow has the contents to create real effects such newly fallen, melted, fallen on roofs, on vegetation etc. This special diorama kit has the special adhesive, snow in sprinkle pack and sparkles to create these wonderful effects. Coverage approx 0.8sqm.

Deluxe Materials - Scenic Snowflakes 500g

Product Code: BD25

Product Description:

For the creation of dramatic snow scenes in minutes. Allows you to easily create real snow effects such as newly fallen, melted, slipped and frozen, on houses, trees and vegetation. Scenic Snowflakes are different to other snow because they allow you to add the detailed snow effects that will distinguish your work from other common ‘picture postcard’ winter scenes. 500ml shaker pack Coverage up to 15,000 sq cm (1.5 sq m) or approx 16 sq ft.

Deluxe Materials - Scenic Shovelled Snow 500g

Product Code: BD26

Product Description:

A unique type of snowflake developed for creating special snow effects. Ideal for piled snow along with snowballs and snowmen which are not possible with other types of snow. Mix with Scenic Spray glue or Scattergrip and mould to shape. 500ml

Deluxe Materials - Scenic Fibres

Product Code: BD28

Product Description:

Scenic Fibres work with Scenic water to allow the easy and faster modelling of more realistic moving and white water eg waterfalls, rivers. Forms a base onto which Scenic water clings as it is poured or brushed even down vertical surfaces in waterfalls. 0.5 metre pack

Deluxe Materials - Pin Point Syringe Kit

Product Code: AC8

Product Description:

Pack of 2 dispensing syringes and 3 sizes of stainless steel needles for accurate application of water based glues: R/C Modellers Glue, Speedbond, Aliphatic Resin, Tacky Glue, Decorator Glue. Ideal for making rivets on scale models and for dispensing fluxes and oils in model railways. Clean syringes and tips with warm soapy water after removal of glue. Stop clogging overnight by resting tips on damp sponge or in water.

Deluxe Materials - Micro Tips

Product Code: AC9

Product Description:

Pack of six micro tips and teflon tubing for precise anti-clog application of superglues (Roket Hot).

Deluxe Materials - Pin Point Bottle Kit

Product Code: AC10

Product Description:

Squeezy bottle & tips for precise gluing with Speedbond PVA, Tacky glue etc. Ideal for fixing railway ballast

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Pin Flow

Product Code: AC11

Product Description:

An applicator specially designed for the precise control of liquid solvent plastic adhesives such as Plastic Magic. When even a brush can sometimes deliver too much this break through device will deliver just the right amount of adhesive to bondthe most intricate parts. Prevents Glue runs. Invisible joints specially on clear plastic.

Note: The sale of Knives is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Deluxe Materials - Re-Cap

Product Code: AC16

Product Description:

Replacement deluxe material bottle tops.

Humbrol - 28ML Liquid Poly (Bottle) 28ml - HE2500 Adhesives / Glues

A solvent based-based cement suitable for plastic model kits only. The product is a low viscosity version Polycement to enable application by brush. Integral brush is supplied

Substrate: Common plastics used to manufacturer model kits including polystrene and ABS.

Drying time: Surface dry in 10-20 minutes. Fully dry 1 hour.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - Poly Cement Medium (Tube) 12ml - HE4021 Adhesives / Glues

A solvent-based cement suitable for plastic model kits

Substrate: Common plastics used to manufacturer model kits including polystrene and ABS.

Drying time: Surface dry in 10-20 minutes. Fully dry 1 hour.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 14ml Precision Poly - AE2615

A solvent based adhesive suitable for plastic model kits with a needle dispenser to enable precision delivery of fine amounts of cement.

Substrate: Common plastics used to manufacturer model kits including polystrene and ABS.

Drying time: Surface dry in 10-20 mins. Fully dry 1 hour.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 28ml Modelcote Mattcote E/F/D 28ml - HC5600

Product Usage: Modelcote Matt Coat is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, low-sheen matt finish.

Product Substrate: Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Mattcote is usually applied as the final coat to a fully painted model.

Product Application: Brush or Airbrush. Thin suitably with airbrushing using Cellulose thinners.

Product Drying Time: Surface dry in 1 hour. Fully dry after 24 hours. Drying time will vary according to temperature. Recoat after 24 hours.

Cleaning: Brushes - Use Cellulose thinners. Airbrush: Flush through using Cellulose Thinners.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 28ml Modelcote Satincote 28ml (HC5400)

Product Usage: Modelcote Satin Coat is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth, mid sheen satin/eggshell finish.

Product Substrate: Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF.

Product Application: Brush or Airbrush. Thin suitably with airbrushing using Cellulose thinners.

Product Drying Time: Surface dry in 1 hour. Fully dry after 24 hours. Drying time will vary according to temperature. Recoat after 24 hours.

Cleaning: Brushes - Use Cellulose thinners. Airbrush: Flush through using Cellulose Thinners.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 28ml Modelcote Glosscote 28ml - HC5500

Product Usage: Modelcote Gloss Coat is a solvent based varnish that goes on clear and drys clear, overcoming the yellowing effect that is associated with traditional varnishes. This dries with a smooth high-sheen gloss finish.

Product Substrate: Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF.

Product Application: Brush or Airbrush. Thin suitably with airbrushing using Cellulose thinners.

Product Drying Time: Surface dry in 1 hour. Fully dry after 24 hours. Drying time will vary according to temperature. Recoat after 24 hours.

Cleaning: Brushes - Use Cellulose thinners. Airbrush: Flush through using Cellulose Thinners.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 28ml Decalfix Bottle - HC6134

Product Usage: Decalfix is a water-based solution for softening decals and securing them into position.

Product Substrate: Common plastics used to manufacture model kits including polystyrene and ABS.

Product Application: Brush on to decals or immerse them into decalfix for approximately 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper.

Product Drying Time: 20-30 minutes. Do no try to fore dry decals, they may crease or shrivel.

Cleaning: Excess should be wipped away using a damp cloth.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 125ml Decalfix Bottle - AC7432

Product Usage:

Shake before use. Cut decal and soak in solution for around one minute until decal starts to come away from the carrier sheet. Brush a small amount of solution on to the destination area. Slide the decal from the carrier sheet on to the destination area using a soft brush. Remove excess Decalfix solution with a soft brush and gently dabbing with a tissue. Leave to dry for a minimum of 6 hours to fully set and harden. Decals are usually scratchproof with 24-48 hours.
Substrate: Decals
How to Clean: With water

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 28ml Clearfix Bottle - HC5707

Product Usage: Clearfix A solvent based polymer solution for use as an adhesive on clear plastic parts without the risk of 'frosting' effect sometimes sen with traditional glues and for making windows translucent areas of 3mm or less.

Product Substrate: Common plastics used to manufacture model kits including polystyrene and ABS.

Product Application: A cocktail stick is usually the most practical means of application. Run a small drop of Clearfix around the edge of the window then drawacros the opening to produce a thin membrane.

Product Drying Time: Overnight.

Cleaning: Excess should be wipped away using a damp cloth. Permanent Once Dry.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 125ml Clearfix Bottle - AC7431

Product Usage:

A thin clear varnish that goes on clear and stays clear. Humbrol Clear dry's to a low gloss finish, a higher gloss finish can be achieved by applying further thin coats.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - 28ml Maskol Bottle - HC5216

Product Usage: Maskol is a rubber solution that can be applied to surfaces to prevent them being painted. When the paint has dried the Maskol can be simply peeled off.

Product Substrate: Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass.

Product Application: Brush only. Apply to surface, allow to dry and paint over. When paint is dry peel off the Maskol.

Product Drying Time: 15-20 Minutes.

Cleaning: Excess should be wipped away using a damp cloth.

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - Model Filler 31ml Tube - AE3016

A solvent-based cement suitable for plastic model kits only. (31ml tube)

Note: The sale of Solvent Based Products is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Lead Free Solder (100g)

Product Code: E088

Product Details:

Economy lead-free solder with flux cores.  Tin Alloy with 0.7% copper. Melting point 227°C.

Expo Tools - Solder With Flux Core (100g)

Product Code: 77594

Product Details:

Solder With Flux Core (100gm Reel) 0.7mm diameter.
High quality flux cored solder ideal for many wiring applications.

Expo Tools - Soldamop

Product code: 775-92

Product Details:

Soldamop size: 2.5mm wide x 1.5m long. Used for soaking up excess solder and for removing solder as items are de-soldered

Humbrol - Coloro Brush Pack Sizes 00,1,4,8 (AG4050)

Product Code: AG4050

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

This pack contains one of the following sized paint brushes; 00, 1, 4, 8

Humbrol - Evoco Brush Pack Sizes 0,2,4,6 (AG4150)

Product Code: AG4150

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

This pack contains one of the following sized paint brushes; 0, 2, 4, 6

Humbrol - Palpo Brush Pack Sizes 000,0,2,4 (AG4250)

Product Code: AG4250

The Palpo natural sable hair brushes are the ultimate modelling brush, keeping their points and shape to allow for accurate and detailed painting, particularly figure work.

This pack of brushes contains one of the following sized paint brushes; 000, 0, 2, 4

Humbrol - Detail Brush Pack (AG4301)

Product Code: AG4301

Pre-Order

Ideal for painting fine detail on a figure. Suitable for Acrylic and Enamel Paints - Sable.

Humbrol - Flat Brush Pack (AG4302)

Product Code: AG4302

Pre-Order

Suitable for Acrylic and Enamel Paints - Synthetic.

Humbrol - Stipple Brush Pack (AG4303)

Product Code: AG4303

Pre-Order

Suitable for Acrylic and Enamel Paints - Natural Hair.

Humbrol - Coloro Brush Size 00 (G4030)

Product Code: G4030 

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 0 (G4000)

Product Code: G4000

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conjuction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 1 (G4001)

Product Code: G4001

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conduction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 2 (G4002)

Product Code: G4002

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conduction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 4 (G4004)

Product Code: G4004

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conduction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 6 (G4006)

Product Code: G4006

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 8 (G4008)

Product Code: G4008

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Coloro Brush Size 12 (G4012)

Product Code: G4012

Coloro Brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. Coloro brushes are made from man-made fibre.

Humbrol - Evoco Brush Size 000 (G4131)

Product Code: G4131 

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 0 (G4100)

Product Code: G4100

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 2 (G4102)

Product Code: G4102

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 4 (G4104)

Product Code: G4104

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 6 (G4106)

Product Code: G4106

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 8 (G4108)

Product Code: G4108

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 10 (G4110)

Product Code: G4110

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Evoco Brush Size 12 (G4112)

Product Code: G4112

Made from natural hair, Evoco brushes are the perfect "all around" brush for many model hobby uses, keeping their shape and quality long after their first use.

Humbrol - Palpo Brush Size 00000 (G4233)

Product Code: G4233

The Palpo natural sable hair brushes are the ultimate modelling brush, keeping their points and shape to allow for accurate and detailed painting, particularly figure work.

Humbrol - Palpo Brush Size 000 (G4231)

Product Code: G4231

President brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. President brushes are made from man-made fibre.

Humbrol - Palpo Brush Size 0 (G4200)

Product Code: G4200

The Palpo natural sable hair brushes are the ultimate modelling brush, keeping their points and shape to allow for accurate and detailed painting, particularly figure work.

Humbrol - Palpo Brush Size 2 (G4202)

Product Code: G4202

The Palpo natural sable hair brushes are the ultimate modelling brush, keeping their points and shape to allow for accurate and detailed painting, particularly figure work.

Humbrol - Palpo Brush Size 4 (G4204)

Product Code: G4204

The Palpo natural sable hair brushes are the ultimate modelling brush, keeping their points and shape to allow for accurate and detailed painting, particularly figure work.

Humbrol - Palpo Brush Size 6 (G4206)

Product Code: G4206

The Palpo natural sable hair brushes are the ultimate modelling brush, keeping their points and shape to allow for accurate and detailed painting, particularly figure work.

Humbrol - President NO.1 Brush Sizes (G2026)

Product Code: G2026

President brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. President brushes are made from man-made fibre.

Humbrol - President NO.2 Brush Sizes (G2043)

Product Code: G2043

President brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. President brushes are made from man-made fibre.

Humbrol - President NO.3 Brush Sizes (G2057)

Product Code: G2057

President brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. President brushes are made from man-made fibre.

Humbrol - President NO.4 Brush Sizes (AG2060)

Product Code: G2060

President brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. President brushes are made from man-made fibre.

Humbrol - Senator NO.2 Brush Sizes (G1010)

Product Code: G1010

Senator brushes are perfectly suited for all paint types, but are particularly good when used in conjunction with the new Humbrol Acrylic Paint. Senator brushes are made from man-made fibre.

Antex - Soldering Iron Starter Kits

Product code: 77750 (15 Watts) 77752 (25 Watts)

Product Details:

All starter kits includes soldering iron, ST4 soldering iron stand, and solder.

All Antex irons in this range feature bits which fit over the element. This gives superior heat transmission to the bit.

Expo Tools - AB602 Airbrush Deal

Product code: AB602

Product Details:

This pack includes, High quality dual action, gravity feed airbrush, Oil less piston Compressor, Braided Air Hose and Water Trap. Features; Full spares availability, Adjustable working pressure from 5 to 35psi, automatic cut out at 4bar (57psi), Internal air reservoir, quiet operation, (47db) and silent standby, Thermal overload protection.

Expo Tools - AB500 Portable Spray Booth

Product code: AB500

Product Details:

Features: Mains Power cord retracts into case

Extracts overspray - eliminates mess

Folds to only 42 x 15x 24cm

Carrying Handel

Includes AB503 turntable

Expo Tools - Master Cut

Product code: 800-22

Product Details:

This pack includes, Produces quick and accurate mitre cuts in wood and plastic strips. Ensures all cuts are identical. Fully adjustable from 45 to 90 degrees. Sturdy construction. Spare blades included. Base Dimensions:155 x 100mm.

Standard Hot Melt Glue Gun

Product code: E102

Product Details:

An improved design hot melt glue gun suitable for industrial or educational use providing a trouble-free supply of tough adhesive. The gun has an electronically controlled heating element which melts the solid glue sticks inserted into the back of the gun.

•Smooth flow of adhesive is controlled by the trigger feed mechanism
•Double insulated construction with 25W element rated at 240V
•Suitable for a wide range of materials including most metals, PVC, plastics, glass, etc.
•Fitted with a UK 13A plug fused at 3A
•GS approved
•Suitable 10mm diameter glue sticks

Glue Sticks for Standard Hot Melt Glue Gun

Product code: E103

Product Details:

Glue Sticks Standard Temperature, Natural colour, Length:100mm. Pack of 12

Low Temperature Glue Gun

Product code: E001

Product Details:

Low temperature glue gun operating at approximately 100 to 120°C which is lower than the normal temperature of around 190 to 200°C, or higher. Ideal for educational applications where the lower temperature reduces the risk of serious burns, or industrial applications where delicate components could be damaged by the use of standard high temperature glues. The gun features a trigger-feed mechanism for ease of use and accurate control of glue feed rate. Power rating (running) 5W. Supplied complete with fitted 13A plug fused at 3A.

Glue Sticks For Low Temperature Glue Gun

Product code: E002

Product Details:

Suitable 100 x 7.4mm diameter glue sticks are available, in packs of 12, in a wide range of colours, ideal for caulking, filling and for decorative/art purposes.
Please note that the glue sticks for this gun are specially formulated for low temperature use, and are therefore not suitable for use with higher temperature guns.

Heat Resistant Mat Essential for use with a glue gun.

Product code: E004

Product Details:

Double-Sided mat with heat resistant surfaces. Ideal for heated stencil cutting, and for use with Hot Glue Guns to protect work surfaces. Size 295 x 210mm (Approx A4)

Glue Spreader

Product code: E008

Product Details:

A small flexible spatula, moulded in white, low density polyethylene (LDPE), ideal for spreading glue, etc. Ribbed handle area for positive grip.

Self Healing Cutting Board A4

Product code: E010

Product Details:

Non-slip self-healing cutting mats available in A4, ideally suited to a wide range of drafting and cutting applications. Surface printed with 10 x 10mm cutting grid to assist positioning.

Self-healing properties prevent knife blade being diverted into previous score marks.

Self Healing Cutting Board A5

Product code: E011

Product Details:

Non-slip self-healing cutting mats available in A5, ideally suited to a wide range of drafting and cutting applications. Surface printed with 10 x 10mm cutting grid to assist positioning.

Self-healing properties prevent knife blade being diverted into previous score marks.

Humbrol - Tool Set (HG9150)

The "Kit Modellers" Tool Set is specifically designed for the Airfix and plastic kit modeller - sprue clippers, tweezers, needle file and knife; all designed for making the perfect model.

Note: The sale of Knives is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - Kit Modellers BIG Tool Set (HG9153)

The "Kit Modellers" BIG Tool Set has everything you'll ever need to make your Airfix plastic model - sprue clippers, tweezers, needle file, knife, mini-strips, pin vice, 2mm drill bit, finger sander/decal slider and low tension mini-clamp ideal for holding your models steady without any risk of damage.

Note: The sale of Knives is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - Cutting Mat (AG9155)

The "Kit Modellers" Cutting Mat is a self-sealing cutting mat with graphics and scale markings to suit all categories of plastic modelling.

Mat Size: A4

Humbrol - Cutting Mat (HG9151)

The "Kit Modellers" Cutting Mat is a self-sealing cutting mat with graphics and scale markings to suit all categories of plastic modelling.

Mat Size: A3

Humbrol - Cutting Mat and Tool Set (HG9152)

The "Kit Modellers" Mat and Tool Set combines the two basic modelling requirements together - mat, sprue clippers, tweezers, needle file and knife.

Mat Size: A3

Note: The sale of Knives is prohibited by Law (Within the UK) to those under 18 years of age. Only add this item to your basket if you are aged 18 years or older.

Humbrol - Workstation (AG9156)

A must for every modeller. The Humbrol Workstation is manufactured from a tough and durable material that can't be melted by Humbrol Poly Cement. Suitable for use with A4 Cutting Mat (AG9155)