Lenz - Standard
Decoder
(3 Function output A, B, C)
Product Code:
L10231
Product information:
(replacement for the LE1000) The DIGITAL plus
STANDARD locomotive decoder is suitable for all DC
locomotives with continuous current draw of 1.0 Amp. or
less. Super smooth and silent high frequency back-emf
motor control. Selectable for operation with 14/27, or
28/128 speed steps. Operation on conventional DC layouts
is possible or can be disabled. Motor output = 1A
continuous, 1.8A max, > 5 A stall. Three function
outputs rated at 100mA each with advanced function
mapping. Directional or independent lighting with
dimming and special effects.
Product information:
The DIGITAL plus SILVER locomotive decoder is suitable
for all DC locomotives with continuous current draw of
1.0 Amp. or less. Super smooth and silent high frequency
back-emf motor control. Asymmetrical DCC support
including directional stopping. Selectable for operation
with 14/27, or 28/128 speed steps. Operation on
conventional DC layouts is possible or can be disabled.
Motor output = 1A continuous, 1.8A max, > 5 A stall.
Four function outputs rated at 100mA each with
advanced function mapping. Directional or independent
lighting with dimming and special effects. Size: L 23mm
x W 16.6mm x H 2.9mm
Product information:
The DIGITAL plus SILVER DIRECT locomotive
decoder has a built in NMRA 8 pin plug and is suitable
for all DC locomotives with continuous current draw of
1.0 Amp. or less with such a socket. Super smooth and
silent high frequency back-emf motor control.
Asymmetrical DCC support including directional stopping.
Selectable for operation with 14/27, or 28/128 speed
steps. Operation on conventional DC layouts is possible
or can be disabled. Motor output = 1A continuous, 1.8A
max, > 5 A stall. Four function outputs rated at
100mA each with advanced function mapping. Directional
or independent lighting with dimming and special
effects. Size: L 23mm x W 16.6mm x H 2.9mm
Product information:
The DIGITAL plus SILVER 21 locomotive decoder has a
built in NMRA 21 pin plug and is suitable for all DC
locomotives with continuous current draw of 1.0 Amp. or
less. with such a socket. Super smooth and silent high
frequency back-emf motor control. Asymmetrical DCC
support including directional stopping. Selectable for
operation with 14/27, or 28/128 speed steps. Operation
on conventional DC layouts is possible or can be
disabled. Motor output = 1A continuous, 1.8A max, > 5 A
stall. Four function outputs rated at 100mA each
with advanced function mapping. Directional or
independent lighting with dimming and special effects.
Size: L 23mm x W 16.6mm x H 2.9mm
Product information:
The DIGITAL plus Gold locomotive decoder is suitable
for all DC locomotives with continuous current draw of
1.0 Amp. or less. Super smooth and silent high frequency
back-emf motor control. Supports the industry proposed
enhancements to the NMRA DCC Bidirectional data
communication RPs USP with optional power module for
operation on dirty track. Asymmetrical DCC support
including directional stopping. Selectable for operation
with 14/27, or 28/128 speed steps. Operation on
conventional DC layouts is possible or can be disabled.
Motor output = 1A continuous, 1.8A max, > 5 A stall.
Four function outputs rated at 200mA each with
advanced function mapping. Directional or independent
lighting with dimming and special effects. Size: L 23.0
mm x W 16.5 mm x H 6.5 mm
Product information:
The DIGITAL plus LS150 turnout decoder provides cost
effective turnout control for up to 6 independent
turnouts. Suitable for twin-coil snap action switch
machines. Suitable for motorized switch machines. High
current provision to support Peco and Atlas switch
machines. The 6 turnout addresses can be sequential or
up to 6 user selected addresses. Control using separate
push-buttons possible. Configuring the LS150 does not
require a separate programming track and the parameters
can be changed at any time in the future even after
installation.
