Hornby Castle Class Steam TTS Sound Decoder
Product Code: R8110
Discontinued
Production Details:
Hornby Castle Class Steam TTS Locomotive Sound Decoder.
This DCC sound decoder requires a dcc controller to operate both the
movement and sound of the locomotive it is fitted to.
Function list
F0 Headlight / Rearlight
F1 Background steam/steam
exhaust/coasting
F2 Whistle long passing
F3 Whistle short 1
F4
Whistle short 2
F5 Whistle two bursts
F6 Wheel slip
F7 Coal shovelling
F8 Blow down
F9 Safety valve
F10 Injector
F11 Cylinder cock
F12 Brake
F13
Blower
F14 Guard's whistle
F15 Coupler clank
F16 Fireman’s breakfast
F17
Toggle between ‘chuffing & ‘coasting’
F18 Aux lighting
Instruction Guide:
Hornby TTS decoder installation guide Installation guide
Features:
- Supports short and long decoder addresses
-
Adjustable acceleration and deceleration
- Back EMF load compensation
- Up to 19 controllable spot sounds
dependent on model including whistles or horns etc
- Two sound channels
allowing for simultaneous play of full locomotive engine sounds, &
individual spot sounds e.g. horns, whistles, brakes, wagons coupling etc.
NOTE: Only one spot sound can be played at the same time
- It is possible
to alter the volume of each sound through an individual dedicated CV. Range
0-8
- Decoder is equipped to support directional front and rear lighting
operation via F0 on the controller, providing that the product is fitted
with lights
- The decoder is equipped with 1 aux function output
controlled by F18 or F25 dependent on locomotive type (diesel or steam)
-
Motor current - maximum continuous 500mA
- Motor current - peak 1amp (no
function load)
- Function output current maximum—100mA (unprotected)
-
Decoder current maximum continuous - 800mA (shared motor and functions)
-
Number of sound channels - 2
- Termination - 8 pin plug NEM652. NMRA
IMPORTANT - The decoder does not support
sound under DC (analogue) operation. Sounds can only be played under DCC
(digital) operation. This applies to all sounds, both running and spot
sounds. The locomotive's motor may be controlled under DC operation.
Discontinued
