DCC Concepts - AE Model Frog Power Control for DCC (3 Pack)
Product Code: AET-FPC.3
Production Details:
AE Model Frog Power Control (3 Pack).
Traditional solenoid turnout motors often have a real shortcoming…
they are not equipped with a way to reliably change the polarity of
the turnout frog unless you buy an expensive mechanical switch to
add to them, which in turn means harder installation, and, because
of the added load when the turnout changes, operation becomes less
reliable. The AE Model Frog Power Control unit fixes these problems
economically with 100% success and almost zero effort. Even better,
unlike other “frog juicers”, there is no need for added soldering.
Just connect the frog and track power wires as shown in the diagram
– 1, 2, 3 done!
1) Connect
the two terminals labelled “R” to your track bus.
2) Connect the the
terminal labelled “F” to your turnout “frog”.
Developed with
advice from the real DCC experts, the AE Model Frog Power Control
makes installation easier, limits the possibility of voltage spikes
on your track bus and removes the risk of unwanted short circuits.
