Train-Tech

Train-Tech - SFX+ Sound Capsule - Steam Loco

Product Code: SFX10

Production Details:

Train-Tech - SFX+ Steam Locomotive Sound Capsule. Easy To Install, No Soldering Required. (OO/HO Scale).

Train-Tech - SFX+ Sound Capsule - Diesel Loco

Product Code: SFX20

Production Details:

Train-Tech SFX+ Diesel Locomotive Sound Capsule. Easy To Install, No Soldering Required. (OO/HO Scale).

Train-Tech - SFX+ Sound Capsule - Electric Loco

Product Code: SFX30

(Pre-Order)

Production Details:

Train-Tech SFX+ Electric Locomotive Sound Capsule. Easy To Install, No Soldering Required. (OO/HO Scale).

Train-Tech - SFX+ Sound Capsule - Passenger Coach Sounds

Product Code: SFX80

Production Details:

Train-Tech SFX+ Passenger Coach Sound Capsule. Easy To Install, No Soldering Required. (OO/HO Scale).

Train-Tech - Batteries - CR2032

Product Code: BAT1

Production Details:

Train-Tech Batteries - CR2032 for AL/CL/SFX Items. Pack of 3 (OO/HO Scale).

Train-Tech - Buffer Light

Product Code: BL1

Production Details:

Train-Tech - Buffer Light. DC or DCC Compatible, Easy To Install, No Soldering Required, Buffer Stop Not Included. (OO/HO Scale).

Train-Tech - Buffer Light - Pack of 10

Product Code: BL1-10

Production Details:

Train-Tech - Buffer Light. Pack of 10. DC or DCC Compatible, Easy To Install, No Soldering Required, Buffer Stop Not Included. (OO/HO Scale).

Train-Tech - Level Crossing Barrier Set with Light & Sound - (Single)

Product Code: LC10

Production Details:

Train-Tech Level Crossing Barrier Set with Light & Sound. Level Crossing lights & sounds with barriers and fence OO / HO models. These are OO scale models of UK style level crossings which are preassembled with lights and sound and come complete with Peco™ static level crossing barriers and fence as shown in the photo. They are easy to fit needing just a 10mm diameter hole drilled in your baseboard and the model is held in place by a special flush Mounting Cap (included). Electrically these are very easy to wire up as all connections are by push fit single core wires. They can be powered by any 9-18V DC supply, DCC or a 9 volt battery.
Manual or Automatic control:
The level crossing lights and sounds can be controlled in a number of ways: 1) A switch connected between the power supply and the level crossing. 2) Controlled completely automatically by a Track Sensor via Layout Link (page 11) 3) Switched by a Mimic Switch connected via Layout Link (page 11) 4) If layout is DCC via your controller which is easily set up using One Touch DCC. (OO Scale)

Train-Tech - Level Crossing Barrier Set with Light & Sound - (Pair)

Product Code: LC10P

Production Details:

Train-Tech Level Crossing Barrier Set with Light & Sound - (Pair). Level Crossing lights & sounds with barriers and fence OO / HO models. These are OO scale models of UK style level crossings which are preassembled with lights and sound and come complete with Peco™ static level crossing barriers and fence as shown in the photo. They are easy to fit needing just a 10mm diameter hole drilled in your baseboard and the model is held in place by a special flush Mounting Cap (included). Electrically these are very easy to wire up as all connections are by push fit single core wires. They can be powered by any 9-18V DC supply, DCC or a 9 volt battery.
Manual or Automatic control:
The level crossing lights and sounds can be controlled in a number of ways: 1) A switch connected between the power supply and the level crossing. 2) Controlled completely automatically by a Track Sensor via Layout Link (page 11) 3) Switched by a Mimic Switch connected via Layout Link (page 11) 4) If layout is DCC via your controller which is easily set up using One Touch DCC. (OO Scale).

Train-Tech - Servo Starter Pack With Controller & 9g Micro Servo

Product Code: SVP1

Production Details:

The Servo controller connects directly to most low power analogue radio control type servos. Servos are versatile low cost control actuators which are ideal for animating layouts.  SV1 makes it easy to control a servo in a number of different ways: ● Train passing a Track Sensor moves the servo to defined positions,  ● Mimic switch moves the servo to defined positions.  ● DCC Controller in loco mode - controls servo using the speed control.  ● DCC Controller in accessory mode - moves the servo to defined positions.  The Servo Controller incorporates controller, decoder and power supply circuit and can be powered directly from 12-16V smooth DC or from the standard DCC track supply. The small SV1 has a 3 pin Servo connector to enable a standard servo to be plugged in, plus screw terminals to connect to DC or DCC power, Track Sensor and Mimic Switch. Contents: 1 x SV1 Servo control, 1 x Basic 9g micro servo, Instructions.

Train-Tech - Traffic Lights Kit

Product Code: TL1

Production Details:

Train-Tech Traffic Lights Kit. Pack contains: Two traffic light kit including LEDs, wire, poles, and light heads. Use with LFX3 automatic traffic light controller, or use on DC or battery using the resistors supplied. Assembly with soldering and glue is required. (OO Scale)

Train-Tech - Traffic Light (Assembled)

Product Code: TL10

Production Details:

Train-Tech Traffic Light. This working traffic light comes assembled ready to fit. Just drill a hole in your baseboard, push it in and connect 2 wires to 9-18 Volts DC, DCC or even a 9 volt battery! It lights in the standard UK sequence and timing varies randomly - just like the real thing! Add a line of white paint around the traffic light head for the finishing touch. A really quick and easy way to add extra interest and realism to your layout in seconds! (OO Scale).

Train-Tech - Multi-Gauge Track Tester

Product Code: TT1

Production Details:

Train-Tech Multi-Gauge Track Tester. ● Quickly tests track for power faults, ●Low cost and easy to use, ● Works on N, OO or HO track, ● Indicates DCC, DC polarity or fault, ● Small enough to check point frogs.

Train-Tech - Lighting Effect Welding

Product Code: LFX5

Production Details:

This set simulates a welder hard at work repairing cars, wagons or industrial items such as sheet metal and steel. The LFX board controls the LEDs and starts the sequence by making the white LED flicker to show the welding. The red LED then starts to get brighter to simulate the heating up of the welding equipment, after a short period of time both lights fade out and the sequence starts again. A great item for any industrial scene or country garage. This unit can be powered by a 9 - 16v supply or by attaching it to your DCC Bus.
Contents: 1 x LFX Control Board, 1 x Red LED, 1 x White LED, Extra LEDs are available for this kit.

Train-Tech - Smart Screen - Single Pack

Product Code: SD1

Production Details:

Train-Tech (OO/HO Scale). Smart Screen is a real working animated screen in miniature which you can customise with your own messages to really bring your layout to life! The small display module has everything built inside so you only need to connect 2 wires to DC or DCC power to make it come alive.

The Smart Screen can display multiple screens which can be triggered by a range of different inputs including switches, DCC commands and even Track Sensors which can be used to show a different screen as a train passes over it.

Everything is contained in the Smart Screen so no complicated wiring or circuit boards - just connect 2 wires to a power source and go! Dimensions are: 31mm Wide x 9.5mm High x 4.5mm Deep. (Picture shows SE1 Smart Screen Housing that is not included)

Train-Tech - Smart Screen Housing (Mount/Hang)

Product Code: SE1

Production Details:

3D Printed housing for your the Smart Screen. the Smart Screen can be mounted into this housing/enclosure. These are 3D printed and may require extra painting and finishing. Dimensions: 33.5mm wide, 12mm high, 6.5mm deep. Pack contains 2 x enclosures.

Train-Tech - Automatic Coach Lighting - Cool White (Standard)

Product Code: CL1

Production Details:

Train-Tech Automatic Coach Lighting - Cool White/Standard. Instant easy lighting for any coach. Pack Contents: 1 x Lighting Strip (220mm), 1 x Cell battery (20mm).

Train-Tech - Automatic Coach Lighting - Warm White (Standard)

Product Code: CL2

Production Details:

Train-Tech Automatic Coach Lighting - Warm White/Standard. Instant easy lighting for any coach. Pack Contents: 1 x Lighting Strip (220mm), 1 x Cell battery (20mm).

Train-Tech - Automatic Lighting Effects - Flashing / Constant (Dual)

Product Code: AL21

Production Details:

Train-Tech Automatic Lighting Effects - Flashing/Constant (Dual). This small module fits neatly into a coach, multi-units or wagon and simulates the rear light on the back of the train. This pack includes a twin terminal for both constant and flashing LED illuminations. Ideal for modern era railways. How it Works:
● Detects motion and turns on automatically, ● Automatically turns off 4mins after last movement. ● No pick-up, wires or soldering required. ● LED plugs straight into terminals. ● Can be fitted to brake vans, coaches, wagons etc. ● Runs for AGES on a standard button battery.

Train-Tech - Automatic Lighting Effects - Dual Function Flickering Flame and Constant Automatic Lighting module

Product Code: AL22

Production Details:

Train-Tech Automatic Lighting Effects - The AL22 is fitted inside a wagon or coach and when it detects motion switches on a flickering flame effect on a small LED simulating a traditional paraffin tail light or steam loco firebox, switching off after no motion is detected for 4 minutes - no switch is required. LED also realistically flickers more when going over bumpy rails! This module also has a constant light output for lighting a coach, cab, etc. How it Works: A low power microprocessor constantly monitors a tiny sensor which can detect small amounts of motion. When movement is detected it flashes LED until no motion is sensed for 4 minutes, then turns off the LED to save power and back to monitoring. Contents: • AL22 Flickering + Constant Lighting, • 1 Lantern Style Red colour red LED, • 1 Warm White LED for interior light, • BAT1 CR2032 lithium button battery.

Train-Tech - Automatic Lighting Effects - Amber Door / Constant (Dual)

Product Code: AL24

Production Details:

Train-Tech Automatic Lighting Effects - Amber Door / Constant (Dual). This small module fits neatly into a coach or multi-unit and simulates the rear light on the back of the train. This pack includes a twin terminal for both constant and door light (amber) LED illuminations. The door light LED can be fitted to a multiple unit or modern coach with automatic style doors. As the train stops the amber LED's turn on to simulate the doors being ready to open. Just like real thing. Ideal for modern era railways. How it Works: ● Detects motion and turns on automatically. ● Automatically turns off 4mins after last movement. ● No pick-up, wires or soldering required. ● LED plugs straight into terminals. ● Can be fitted to brake vans, coaches, wagons etc. ● Runs for AGES on a standard button battery.

Train-Tech - Automatic Coach Lighting - Cool White (Standard) - N-Gauge

Product Code: CN1

Production Details:

Train-Tech Automatic Coach Lighting - Cool White/Standard. Instant easy lighting for any coach. Pack Contents: 1 x Lighting Strip (220mm), 1 x Cell battery (20mm). N-Gauge

Train-Tech - Automatic Coach Lighting - Warm White (Standard) - N-Gauge

Product Code: CN2

Production Details:

Train-Tech Automatic Coach Lighting - Warm White/Standard. Instant easy lighting for any coach. Pack Contents: 1 x Lighting Strip (220mm), 1 x Cell battery (20mm). N-Gauge

Train-Tech - Signal Kit - Kit Only (no LEDs or Resistors)

Product Code: SK1

Production Details:

This kit contains all the parts you need to build a stand alone signal with no LEDs. Ideal for those out of sight scenic areas. They can also be used as spare parts for the other signals made by Train Tech.

Train-Tech - Signal Kit - 2 Aspect Home

Product Code: SK2

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 2 Aspect Home, Pre-Assembled LED Stem
Includes Detailing Pack, Easy to Follow Instructions. LED Colours: 1 x Red, 1 x Green.

Train-Tech - Signal Kit - 2 Aspect Distant

Product Code: SK3

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 2 Aspect Distant, Pre-Assembled LED Stem, Includes Detailing Pack, Easy to Follow Instructions, LED Colours: 1 x Yellow, 1 x Green.

Train-Tech - Signal Kit - 3 Aspect Home Distant

Product Code: SK4

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 3 Aspect Home / Distant, Pre-Assembled LED Stem, Includes Detailing Pack, Easy to Follow Instructions. LED Colours: 1 x Red, 1 x Yellow, 1 x Green.

Train-Tech - Signal Kit - 3 Aspect Distant

Product Code: SK5

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 3 Aspect Distant, Pre-Assembled LED Stem, Includes Detailing Pack, Easy to Follow Instructions. LED Colours: 2 x Yellow, 1 x Green.

Train-Tech - Signal Kit - 4 Aspect Outer Distant

Product Code: SK6

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 4 Aspect Outer Distant, Pre-Assembled LED Stem, Includes Detailing Pack, Easy to Follow Instructions. LED Colours: 1 x Red, 2 x Yellow, 1 x Green.

Train-Tech - Signal Kit - Dual Head Home

Product Code: SK7

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 2 Aspect Dual Head Home, Pre-Assembled LED Stem, Includes Detailing Pack, Easy to Follow Instructions. LED Colours: 2 x Red, 2 x Green 

Train-Tech - Signal Kit - Dual Head Distant

Product Code: SK8

Production Details:

Colour light signal kit based on the signals used on modern railways. These kits are quick and easy to build and only require a small amount of soldering. This kit contains the LED Stem, Signal Pole, 3 Different Aspect Covers (2, 3 and 4), the Back Switch Casing and the Ladder. It also comes with the suitable resistor for the LEDs. Be sure to read the instructions carefully before attempting to construct this kit. Signal Details: 2 Aspect Dual Head Distant, Pre-Assembled LED Stem, Includes Detailing Pack, Easy to Follow Instructions. LED Colours: 2 x Yellow, 2 x Green.

Train-Tech - DCC Signal - 2 Aspect Home

Product Code: DS1

Production Details:

Train-Tech DCC Signal - 2 Aspect Home (Green / Red).

Train-Tech - DCC Signal - 2 Aspect Distant

Product Code: DS2

Production Details:

Train-Tech DCC Signal - 2 Aspect Distant. (Green / Yellow)

Train-Tech - DCC Signal - 3 Aspect Home Distant

Product Code: DS3

Production Details:

Train-Tech DCC Signal - 3 Aspect Home Distant. (Green / Yellow / Red)

Train-Tech - DCC Signal - 3 Aspect Distant

Product Code: DS4

Production Details:

Train-Tech DCC Signal - 3 Aspect Distant. (Yellow / Green / Yellow)

Train-Tech - DCC Signal - 4 Aspect Outer Distant

Product Code: DS5

Production Details:

Train-Tech DCC Signal - 4 Aspect Outer Distant. (Yellow / Green / Yellow / Red)

Train-Tech - DCC Signal - Dual Head Home

Product Code: DS6

Production Details:

Train-Tech DCC Signal - Dual Head Home. (Green / Red)

Train-Tech - DCC Signal Controller Dual 2 Aspect

Product Code: SC1

Production Details:

Train-Tech DCC Signal Controller Dual 2 Aspect. This module allows you to convert signals to DCC operation. This unit is quick and easy to connect up to existing signals on your railway and with the use of screw terminals you do not need to do any soldering. Simply connect the Red, and Green LED wires to the relevant terminals and connect the board to the nearest piece of track or DCC Bus Wire. This unit is easy to programme too, just press the "LEARN" button and enter an address on your DCC controller. Using this method you can easily synchronise points and signals together by giving them the same address. Compatible with the SK Range of Train Tech signals and other LED signals.

Train-Tech - DCC Signal Controller 3 / 4 Aspect or 2 Aspect / Route

Product Code: SC2

Production Details:

Train-Tech DCC Signal Controller 3/4 Aspect or 2 Aspect/Route. This module allows you to convert signals to DCC operation. This unit is quick and easy to connect up to existing signals on your railway and with the use of screw terminals you do not need to do any soldering. Simply connect the Red, and Green LED wires to the relevant terminals and connect the board to the nearest piece of track or DCC Bus Wire. This unit is easy to programme too, just press the "LEARN" button and enter an address on your DCC controller. Using this method you can easily synchronise points and signals together by giving them the same address.
Compatible with the SK Range of Train Tech signals and other LED signals. Features: Control colour light LED signals by DCC, One Touch DCC button - No Programming!, Screw terminals for wires - no soldering required, Connect directly to the signals LEDs - resistors are built in,  Simple 2 wire connection to track or controller output, Can be synchronised to other signals and points by programming the same DCC accessory address.

Train-Tech - Sensor Signal Starter Pack

Product Code: SSP1

Production Details:

Train-Tech Sensor Signal Starter Pack. Signals with built in sensors which operate automatically on their own or can link to other Sensor Signals and Mimic Switches using a single wire. On DCC they slide into the track like a power clip or can be wired to work on analogue DC or digital DCC. Automatic starter pack - 4 x SS5 Sensor signals with mimic switch and connecting wire.

Train-Tech - Track Sensor

Product Code: ST10

Production Details:

Train-Tech Track Sensor. The Track sensor is similar to a Sensor Signal except that it has no signal head. It plugs into the track in the same way, works on both DCC and DC layouts and has the same sockets to connect it to other Layout Link products. You can use a Track Sensor to: ● Link to a Mimic Switch or Light to show trains passing or locations, ● Link to a Sensor Signal to change the following block section signal status, ● Change a Semaphore signal automatically using the SC300 Dapol controller, ● Trigger the LC10 Level Crossing lights and sounds when a Train approaches

Train-Tech - Mimic Light with Plug in LEDs

Product Code: ML1

Production Details:

Train-Tech Mimic Light with Plug in LEDs. Mimic Lights are very similar to Mimic Switches except they have no switch and only show the status or position of Layout Link accessories. Mimic Lights also have DCC decoders built in and can be set to display the status of any type of DCC accessory!  You can use a Mimic Light to: ● Mimic the point positions of a PC200 or any other make of DCC point decoder, ● Mimic Signal colours and Train locations when connected to Sensor Signals, ● Show the position and movement of a Train over a Track Sensor, ● Show Colour light or Semaphore status of DCC signals, ● Mimic the colours of the barrier lights.

Train-Tech - Mimic with Toggle Switch / Plug in LEDs

Product Code: MS1

Production Details:

Train-Tech Mimic with Toggle Switch / Plug in LEDs. Mimic switches feature a switch, 2 LED sockets and a Layout Link connector. You can use a Mimic Switch to: ● Manually control a point on the PC200; LEDs mimic the point position, ● Manually override an Sensor Signal; LEDs mimic the Signal colours and Train location. ● Manually control a Semaphore signal with the SC300 - LEDs mimic the signal position, ● Control an LC10 Level Crossing; LEDs mimic the colours of the barrier lights, You will also be able to control future new Layout Link products when they are released.

Train-Tech - Mimic with Push Button Switch / Plug in LEDs

Product Code: MS2

Production Details:

Train-Tech Mimic with Push Button Switch/Plug in LEDs. Mimic switches feature a switch, 2 LED sockets and a Layout Link connector. You can use a Mimic Switch to: ● Manually control a point on the PC200; LEDs mimic the point position, ● Manually override an Sensor Signal; LEDs mimic the Signal colours and Train location. ● Manually control a Semaphore signal with the SC300 - LEDs mimic the signal position, ● Control an LC10 Level Crossing; LEDs mimic the colours of the barrier lights, You will also be able to control future new Layout Link products when they are released.

Train-Tech - Pre-Wired Toggle Switch Terminal Pack (6)

Product Code: TTCON12

Production Details:

These easy to use easy to fit connectors allow quick solderless connection to a variety of common switches. This pack contains 6 x pre-wired push fit connectors with 1m wire attached (2 x Green, 2 x Black, 2 x Red) enough for 2 point motor switches. These can be used on any standard mini-toggle switches (E027, E028, E029, E030).

Train-Tech - DCC Point Controller - Single (1 Point)

Product Code: PC1

Production Details:

Train-Tech DCC Point Controller - Single (1 Point). This DCC module enables you to quickly and easily control most popular 2-position 12-16V point motors, eg Peco, Hornby etc. Some semaphore signals and uncouplers can also be controlled by point motors. Like all of our DCC modules it takes all of its power from the standard 2 wire DCC track or controller output and it has a built in CDU which helps give the point motor a good boost of power without draining too much from the DCC supply all at once. The point motor is simply connected to the control module. One-Touch DCC™ is a brand new way of instantly controlling your new signals or accessories - NO programming CV codes etc.

Train-Tech - DCC Point Controller - Quad (4 Points)

Product Code: PC2

Production Details:

Train-Tech DCC Point Controller - Quad (4 Points). This module enables you to quickly and easily control up to four of the most popular 2-position 12-16V point motors, eg Peco, Hornby etc. Some semaphore signals can also be controlled by point motors. Like all of our DCC modules it takes all of its power from the standard 2 wire DCC track or controller output and it has a built in CDU which helps give the point motors a good boost of power without draining too much from the DCC supply all at once. The point motors are simply connected to the control module. One-Touch DCC™ is a brand new way of instantly controlling your new signals or accessories - NO programming CV codes etc.

Train-Tech - DCC Point Controller - Quad with Route Store / Switching

Product Code: PC200

Production Details:

Train-Tech DCC Point Controller - Quad with Route Store / Switching. Like the PC2, this module includes a built-in CDU and controls 4 solenoid point motors by DCC, setting up instantly using One Touch DCC. Manual Control:
In addition to control by DCC, the PC200 also has 4 switch inputs for manually controlling each of the 4 points. You can either use regular switches such as toggles, or you can also connect the new Mimic Switch to both control and display the Points position on your own control panel - see Mimic Switches and Lights. Route Store:
As well as the 4 main DCC addresses, the PC200 can also save multiple routes; By setting an extra address you can control groups of points using a single command, allowing easy setting of routes.

Train-Tech - DCC Signal Controller Dual Dapol Semaphore (with Inputs)

Product Code: SC300

Production Details:

Train-Tech DCC Signal Controller Dual Dapol Semaphore With Inputs The SC3 controls one or two Dapol N or OO gauge motorised semaphore signals by DCC. Each signal can be given a separate DCC address with their position controlled by the SC3. The signals connect directly using their wires and no modification or power supply is required. This unit can also be connected to the Mimic switches designed by Train Tech.

Gaugemaster - DCC Point Controller - Quad with Route Store / Switching (Twin Pack)

(Train-Tech)

Product Code: DCC32

Production Details:

Train-Tech DCC Point Controller - Quad with Route Store / Switching. Like the PC2, this module includes a built-in CDU and controls 4 solenoid point motors by DCC, setting up instantly using One Touch DCC. Manual Control: In addition to control by DCC, the PC200 also has 4 switch inputs for manually controlling each of the 4 points. You can either use regular switches such as toggles, or you can also connect the new Mimic Switch to both control and display the Points position on your own control panel - see Mimic Switches and Lights. Route Store: As well as the 4 main DCC addresses, the PC200 can also save multiple routes; By setting an extra address you can control groups of points using a single command, allowing easy setting of routes. Pack of 2.