PECO Lineside

PECO Lineside - Water Tower

Product Code: LK-1

Production Details:

Often seen in the loco yard or near the platform end. Use LK-2 Water Cranes if additional cranes are required. Technical Specification: Length: 88mm

PECO Lineside - Water Crane

Product Code: LK-2

Production Details:

Usually supplied by a water tower (See LK-1, Ratio 506, 540, 551 and Wills SS34 kits). Technical Specification: Length: 68mm

PECO Lineside - Plate Girder Bridge Side

Product Code: LK-10

Production Details:

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack. Technical Specification: Length: 222mm.

PECO Lineside - Truss Girder Bridge Side

Product Code: LK-11

Production Details:

Can be used with Wills SS83 Stone Piers to create an impressive viaduct as seen on many railways around the world. Detailed plastic moulding supplied 2 in a pack. Technical Specification: Length: 222mm.

PECO Lineside - Station Platform Shelter and Hut, Timber

Product Code: LK-16

Production Details:

This plastic kit contains a platform shelter plus a timber hut.
Technical Specification: Length: 155mm, Width: 35mm

PECO 'Manyways' Overall Roof Kit

Product Code: LK-20X

Production Details:

A kit of pre coloured and clear parts that can be built in a number of different ways and can be stood on a platform or on ground level.
Technical Specification: Length: Double Span: 254 Single Span: 508mm, - Width: Double Span: 382 Single Span: 191mm.

PECO Lineside - Yard Crane

Product Code: LK-35

Production Details:

Kit of a useful general purpose type crane, also often seen at canal basins etc.  Technical Specification: Length: 146.5mm, Depth: 50.8mm.

PECO Lineside - Level Crossing Gates

Product Code: LK-50

Production Details:

Traditional wooden type gates (complete with separate pedestrian access gates), giving double track spacing when closed across railway tracks. Technical Specification: Length: 100mm

PECO Lineside - Level Crossing Barriers

Product Code: LK-51

Production Details:

Modern type crossing barriers complete with dummy light standards. Can be used with the Peco Setrack Level Crossings ST-261 / ST-263 / ST-266 / ST-267 and ST-268. Technical Specification: Length: 50mm.

PECO Lineside - Turntable (Well Type)

Product Code: LK-55

Production Details:

This easily assembled kit makes a model of a Ransome and Rapier well type turntable. It can be used with either Code 100 or Code 75 track. As supplied it is hand operated, but a motorising kit will be available soon. Full instructions supplied. Technical Specification: Length: 327mm, Depth: 31mm.

PECO Lineside - Inspection Pit with Code 100 Rail

Product Code: LK-56

Production Details:

Modular design, makes it easy to assemble pits of any required length. A great addition to the LK-80 Modern Train Shed unit or create a modern diesel/EMU servicing shed using the Wills SSM300 Modern Industrial Building and SSM315 Extension kits. Contents: This Modular Kit contains six pit mouldings, two pairs of steps, four walkway plates and four 165mm long rails. Technical Specification: Total Length: 297mm.

PECO Train Shed / Locomotive Depot / Engine Shed

Product Code: LK-80

Production Details:

Kit consists of parts to build one complete Train Shed Unit which will span two tracks, and can be combined with further units to build a larger facility if required. Inspection pits were often placed in the tracks in these buildings (See LK-56/156). Easily adapted to create a modern building for non railway use. Technical Specification: Length: 349mm, Width: 168mm.

PECO Lineside - Goods Shed Kit

Product Code: LK-82

Production Details:

A pre coloured plastic kit including a selection of accessories and full instructions. Full instructions included. Technical Specification: Length: 309.5mm, Width: 85mm.

PECO Lineside - Signal Box

Product Code: LK-83

Production Details:

This pre coloured plastic kit is modelled on the iconic BR design built at Potters Bar in the 1950's. Full instructions included. Technical Specification: Length: 79mm, Width: 85mm.

PECO Flexible Field Fencing (10)

Product Code: LK-85

Production Details:

This 4-rail fencing will follow ground contours with the posts remaining vertical. This kit comes with 10 fence sections. The LK-86 Stiles and Gates pack provides access places. Technical Specification: Total length: 1080mm, Individual length 108mm

PECO Field Gates (2), Stiles (2) and Wicket Gate

Product Code: LK-86

Production Details:

A useful addition to the LK-85 Flexible Field Fencing. Pack Contents: 2 x Field Gates, 2 x Stiles, and a Wicket Gate

PECO Laser Cut - Wooden Station Building

Product Code: LK-200

Production Details:

A accurately laser cut wood kit supplemented by injection moulded roof, windows and doors. Glue and paints required to complete model. Technical Specification: Length: 110mm, Width: 97mm.

PECO Laser Cut - Highland Railway Signal Box (Based on Helmsdale)

Product Code: LK-201

Production Details:

A accurately laser cut wood kit supplemented by injection moulded roof. Glue and paints required to complete model. Technical Specification: Length: 90mm, Width: 40mm.

PECO Laser Cut - West Highland Railway Extension Signal Box (Based on Arisaig)

Product Code: LK-202

Production Details:

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure. Technical Specification: Length: 65mm, Width: 65mm.

PECO Laser Cut - West Highland Railway Extension Station Building (Based on Arisaig)

Product Code: LK-203

Production Details:

The NEW West Highland laser-cut wood kits, all based on buildings on the existing West Highland Line extension between Fort William and Mallaig in Scotland. In fact Arisaig station was the inspiration for these attractive models, a delightful station on a very scenic and popular route, famous for many reasons but likely to be moist memorable for its role in the Harry Potter films. It is a route that has become a firm favourite with modellers so these kits will certainly be welcomed by many and be the inspiration for a number of new layout builds for sure.

PECO Laser Cut - West Highland Railway - Platform Shelter (Based on Arisaig)

Product Code: LK-204

Production Details:

Built by the North British Railway, the West Highland Line travelled through a stunning part of the country and soon became popular with tourists as well as providing an essential link to the outside world from the sparsely populated Highland areas. The station buildings are particularly attractive and our kit of the station at Arisaig personifies that appealing design. Size: Footprint 71mm x 25mm.

PECO Laser Cut - GWR Wooden Station Building (Monkton Combe)

Product Code: LK-205

Production Details:

Monkton Combe, once an intermediate station on the long-closed Camerton branch near Bath, was thrust into the limelight in 1952 when it was chosen to be the location for the filming of the famous Ealing Comedy "The TitfieldThunderbolt". Technical Specification: 206mm x 60mm (Footprint).

PECO Laser Cut - Victorian Semi-detatched Houses (Low Relief Fronts)

Product Code: LK-206

Production Details:

A typical semi-detached brick house typical of the Victorian period in Britain. You will be familiar with this style of house as they are still everywhere in the UK! Several kits can be combined to create a terrace of houses, so commonly seen in locations around the country in relation to the railways. A row of house backs alongside the railway and against the backscene, a row of house fronts high on a hill above the station, or a street of semi-detached houses in a town scene, the possibilities are endless! The kits will need painting so the modeller can personalise each one, so necessary when you create a terrace of buildings. No two houses would ever be the same. Acrylic paints are best. Size: Footprint with pavements: 158mm x 63mm.

PECO Laser Cut - Victorian Semi-detatched Houses (Low Relief Backs)

Product Code: LK-207

Production Details:

A typical semi-detached brick house typical of the Victorian period in Britain. You will be familiar with this style of house as they are still everywhere in the UK! Several kits can be combined to create a terrace of houses, so commonly seen in locations around the country in relation to the railways. A row of house backs alongside the railway and against the backscene, a row of house fronts high on a hill above the station, or a street of semi-detached houses in a town scene, the possibilities are endless! The kits will need painting so the modeller can personalise each one, so necessary when you create a terrace of buildings. No two houses would ever be the same. Acrylic paints are best. Size: Footprint with pavements: 158mm x 99mm.

PECO Laser Cut - Victorian Semi-detatched Houses

Product Code: LK-208

Production Details:

A typical semi-detached brick house typical of the Victorian period in Britain. You will be familiar with this style of house as they are still everywhere in the UK! Several kits can be combined to create a terrace of houses, so commonly seen in locations around the country in relation to the railways. A row of house backs alongside the railway and against the backscene, a row of house fronts high on a hill above the station, or a street of semi-detached houses in a town scene, the possibilities are endless! The kits will need painting so the modeller can personalise each one, so necessary when you create a terrace of buildings. No two houses would ever be the same. Acrylic paints are best. Size: Footprint: 158mm x 162mm.

PECO Ballast & Scenery Glue (500ml)

Product Code: PT30

Production Details:

Peco ballast and scenery glue. The attraction of this glue is that it is ready-made, not needing to be mixed, watered-down, or have additional additives put in such as washing up liquid. It comes in a convenient and handy 500ml bottle with a screw top, supplied in singles and available now from stock.

PECO River Valley Photographic Backscene

Product Code: SKP-01

Production Details:

 We are pleased to announce our new photographic backscene range, the first one being that of a river valley scene based on the River Axe in Devon. Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm.

PECO Plain Sky Photographic Backscene

Product Code: SKP-02

Production Details:

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm.

PECO Sky & Clouds Photographic Backscene

Product Code: SKP-03

Production Details:

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm.

PECO Countryside Photographic Backscene

Product Code: SKP-04

Production Details:

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm.

PECO Water Meadow Photographic Backscene

Product Code: SKP-05

Production Details:

 Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm, Suitable for all scales and gauges

PECO Town Scene Photographic Backscene

Product Code: SKP-06

Production Details:

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm, Suitable for all scales and gauges 

PECO Mountain Photographic Backscene

Product Code: SKP-07

Production Details:

Supplied in a square-section tube, the three separate sheets will match perfectly together to form a continuous run of 2400mm (95in), and reaching to a height of 333mm (13in). Future backscenes will match at either end allowing longer runs of scenery throughout the full length of a layout. Technical Specification: Length: 2400mm, Suitable for all scales and gauges 

PECO Catenary System Startup Pack

Product Code: LC-100

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. Contact wires available separately (Refs LC-150 - 4). This pack includes: ● 12 Masts plus push on - push off hangars (additional masts available separately Ref. LC110), ● 2 Installation Jigs (also available separately Ref LC-115), ● Comprehensive Installation Guide (Available separately as SYH-26 Modelling Overhead Catenary).

PECO Catenary System Mast

Product Code: LC-110

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes: An additional Mast plus push on/push off hangar to extend the LC-100 Catenary System Startup Pack.

PECO Catenary Mast Installation Jig

Product Code: LC-115

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. The Installation jig is for use when installing the OHLE Catenary system. N.B. 2 of these jigs are included in the LC-100 Catenary System Startup Pack.

PECO Catenary Contact Wires 200mm

Product Code: LC-150

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes: 5 x 200mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.  Technical Specification: Length: 1000mm

PECO Catenary Contact Wires 260mm

Product Code: LC-151

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes: 5 x 260mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.  Technical Specification: Length: 1300mm.

PECO Catenary Contact Wires 340mm

Product Code: LC-152

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes: 5 x 340mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Technical Specification: Length: 1700mm.

PECO Catenary Contact Wires 380mm

Product Code: LC-153

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes: 5 x 380mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.
Technical Specification: Length: 1900mm.

PECO Catenary Contact Wires 500mm

Product Code: LC-154

Production Details:

The Peco Catenary System enables 00 Gauge modellers to faithfully replicate the BR Mk.3 System widely used around the country. The system features all metal construction with steel posts and copper contact wires with comprehensive instructions and installation jigs available. This pack includes:
 5 x 500mm long OHLE Contact Wires for use with the LC-100 Catenary System 12 Mast Pack and LC-110 Catenary System Mast.  Technical Specification: Length: 2500mm