ESU - Decoder Tester
Product Code: ESU-53900
Production Details:
The Profi Decoder tester makes it easy for you:
simply connect the tester to your command station or the
LokProgrammer. It enables you to test any decoder without exposing
it to any external factors caused by the locomotive that may
influence its performance.
Features:
In order to make things as easy as possible for you, the Profi
Decoder Tester is equipped with some useful features. It has all
commonly used interface sockets for connecting a decoder for the
smaller scale models:
Besides a 6-pole NEM 651 socket and the
8-pole NEM 652 socket, it also has an 21MTC interface as per NEM
660, a PluX22 socket as well as a Next18 interface: No matter which
type of decoder you have: Simply plug it in – it will fit! And
that’s all there is to it!
Decoders without any interface can
be contacted with individual terminals.
A quality coreless
motor with flywheel serves in conjunction with LEDs indicating the
direction for checking the motor output: Thus it is quite easy to
check on the low speed performance and the even speed of the
decoder. An LED monitor informs you about the functioning of the
headlights and back-up lights as well as the function outputs AUX1
through AUX6.
For testing LokSound decoders we have
integrated a 20 mm speaker. You may choose if the integral speaker
should be switched off or if it should have 100 Ohm respectively 16
Ohm – thus the Decoder Tester is perfectly suitable for any ESU
decoder generation!
Two SUSI plugs facilitate the direct test
of optional SUSI modules as well as the connection to another
circuit board.
The electrical connection to either the
command station or the LokProgrammer is facilitated by a removable,
2-pole terminal block (same system as used on the LokProgrammer and
the ECoS) or via two solder points.
Extension:
Now there is an extension board that enables you
to also connect our large scale decoders to the Decoder Tester. With
this vast range of components your Profi Decoder Tester will soon be
an indispensable aid in your workshop!